When an iPhone fails to power on after a software update, it can be a frustrating experience. Many users encounter this issue, and there are several potential causes and solutions to consider. This article will guide you through the steps to troubleshoot and resolve the problem effectively.
Entendendo o problema
After a software update, your iPhone might get stuck on the Apple logo, display a black screen, or fail to turn on entirely. This issue can arise due to various reasons, such as incomplete updates, software bugs, or conflicts with existing apps. Before trying advanced troubleshooting steps, there are some basic solutions you can try.
Checking Battery and Charging
Before assuming your iPhone is broken, ensure the battery is charged. Sometimes, after an update, the battery might drain significantly, leading to startup issues.
- Connect to a Power Source
- Plug your iPhone into a wall charger using a reliable charging cable.
- Allow it to charge for at least 15 minutes before attempting to turn it on again.
- Inspect the Charging Cable
- Check for any visible damage to the cable or the charging port.
- If possible, try using a different charger or cable to eliminate charging issues.
Performing a Force Restart
If the iPhone still does not turn on after charging, the next step is to perform a force restart. This process varies depending on the iPhone model you own.
For iPhone 8 and Later
- Pressione e solte rapidamente o botão de aumentar o volume.
- Pressione e solte rapidamente o botão Diminuir volume.
- Pressione e mantenha pressionado o botão lateral até que o logotipo da Apple apareça.
For iPhone 7 and 7 Plus
- Press and hold both the Volume Down button and the Side button until the Apple logo appears.
For iPhone 6s and Earlier
- Press and hold both the Home button and the Top (or Side) button until the Apple logo appears.
Restoring via iTunes or Finder
If your iPhone remains unresponsive, restoring it through iTunes (on Windows or macOS Mojave and earlier) or Finder (on macOS Catalina and later) might be necessary. This process may erase data, so it’s essential to perform it only when needed.
- Connect Your iPhone to a Computer
- Use a USB cable to connect your iPhone to your computer.
- Open iTunes or Finder
- Launch iTunes if you’re using Windows or macOS Mojave and earlier.
- Open Finder if you’re using macOS Catalina and later.
- Put iPhone into Recovery Mode
- For iPhone 8 and later, quickly press and release the Volume Up button, then the Volume Down button, and finally, press and hold the Side button until you see the recovery mode screen.
- For iPhone 7 and 7 Plus, press and hold the Volume Down and Side buttons simultaneously until you see the recovery mode screen.
- For iPhone 6s and earlier, press and hold the Home and Top (or Side) buttons until recovery mode appears.
- Restaurar seu iPhone
- In iTunes or Finder, you will see an option to Restore or Update. Choose Restore.
- Follow the on-screen instructions, and wait for the process to complete.
Using DFU Mode
If restoring through recovery mode doesn’t work, you can try Device Firmware Upgrade (DFU) mode. This is a deeper restore process that can resolve more severe issues.
Steps to Enter DFU Mode
- Connect your iPhone to the computer using a USB cable.
- Abra o iTunes ou o Finder.
- Depending on your iPhone model, follow the specific button press sequence to enter DFU mode:
- For iPhone 8 and later: Press and quickly release the Volume Up button, press and quickly release the Volume Down button, then press and hold the Side button until the screen goes black. Once it goes black, hold the Volume Down button while continuing to hold the Side button for about 5 seconds. After 5 seconds, release the Side button but continue holding the Volume Down button for an additional 10 seconds. If the screen remains black, your iPhone is in DFU mode.
- For iPhone 7 and 7 Plus: Press and hold the Volume Down and Side buttons together for 8 seconds. After 8 seconds, release the Side button but continue holding the Volume Down button for another 10 seconds.
- For iPhone 6s and earlier: Press and hold the Home button and the Top (or Side) button for 8 seconds. After 8 seconds, release the Top button but continue to hold the Home button for another 10 seconds.
- Restore using iTunes or Finder: Your computer should detect your iPhone in DFU mode, prompting you to restore it.
Seeking Professional Help
If none of the above solutions work, the issue may be hardware-related or a more complex software problem. At this point, it might be time to contact Apple Support or visit an Apple Store for further assistance.
By following these steps, you can troubleshoot and potentially fix your iPhone if it doesn’t turn on after an update.